3D Systems vs. Stratasys Earnings: A Direct Comparison of Their Q2 Results

Now that the two leading 3-D printing companies, 3D Systems and Stratasys , have both reported second-quarter 2014 earnings, it should prove enlightening to directly compare their results. Qualitative factors can be just as important as quantitative ones, and future results are much more important than current ones. With these caveats in mind, our findings from a face-off between these 3-D printing sector bigwigs on key metrics should nevertheless prove helpful to some in making investing decisions in the 3-D printing space.

I'll use the same format as I did last quarter. First, we'll look at key quarterly stats; then, full-year 2014 guidance; and lastly, valuations.

Total revenue growth

3D Systems 25% to $151.5 million, missing analysts' estimates of $162.3 million.
Stratasys 67% to $178.5 million, beating estimates of $156.6 million.

ADVANTAGE: Stratasys.

Details on revenue growth by segment (as well as other facets) can be found in my articles on 3D Systems' and Stratasys ' Q2 results.

Organic revenue growth

3D Systems 10%
Stratasys 35%

ADVANTAGE: Stratasys.

It's been especially important for investors to focus on 3D Systems' organic growth rate (revenue growth in businesses owned for at least one year), given the company has largely grown through many smaller acquisitions. Turbocharged growth-by-acquisition strategies can present several concerns. That said, until recently, it's seemed that 3D Systems was doing a decent job incorporating the acquisitions into its fold.

This is the first quarter where 3D Systems has seen a significant drop in organic growth rate on a year-over-year basis -- organic growth dropped to 10% from 30%. While this is concerning, one quarter doesn't make a trend. If there is an issue, it should come out during the next two quarters. 3D Systems has stated for the past several quarters that the second half of the year would be much stronger than the first.

Non-GAAP or adjust ed earnings per share

3D Systems $0.16, down 20%, and missing estimates of $0.18.
Stratasys $0.55, up 22% from the year-ago period, and beating estimates of $0.45.

Earnings-per-share numbers are not directly comparable across companies, unlike the above two metrics. That said, in the context in which EPS are usually judged -- changes from the year-ago period and relative to analysts' estimates -- Stratasys had much better results. However, it's important to remember that Stratasys' percentage increase over the year-ago period is getting a boost from the Objet merger now being essentially digested. Both companies have upped their growth games in 2014, and are sacrificing short-term profits for increased spending aimed at capturing market share and fueling long-term growth. So, 3D Systems' decreasing profitability is to be expected.


3D Systems $0.02, down from $0.10
Stratasys $0.00, up from $(0.07)

A similar thought as above applies with respect to the "winner" here, as well as the effects of the Objet merger on the comparison. This is discussed a bit more with respect to 2014 guidance.

Non-GAAP gross margin

3D Systems 47.8%, down from 52.1%
Stratasys 59.8%, up from 59.2%

ADVANTAGE: Stratasys.

GAAP gross margin

3D Systems 47.8%, down from 52.1%
Stratasys 51.3%, up from 47.3%

ADVANTAGE: Stratasys.

(Yes, 3D Systems' GAAP and non-GAAP gross margins are the same.)

Stratasys' gross margin got a boost from an increase in gross margin in its service business. This more than offset the small decrease in gross margin in its systems (printer) business.

3D Systems blamed its gross margin decrease on "a one time inventory write down, the residual impact of start up costs of new products, change in quarterly sales mix and timing of shipments." The company stated that the "[f]undamentals of business model remain intact and we expect gross profit margin to rebound and resume its trajectory in the second half."

Research and development spending

3D Systems 11.7% of revenue, up from 7.9% in the year-ago period.
Stratasys 9.9% of revenue, up from 8.9%, but essentially in line with averages during the past few quarters.

ADVANTAGE: 3D Systems.

Spending on R&D is surely a good thing, though a company's spending level doesn't always equate to the effectiveness of its efforts.

As with last quarter, 3D Systems is now spending a higher percentage of its revenue on R&D than is Stratasys. However, this is a new development. Stratasys' R&D level has been consistent at about 10% of revenue for some time, whereas 3D Systems recently significantly boosted its spending level. This situation shouldn't come as a surprise, given Stratasys has largely been growing organically, while 3D Systems has relied on acquisitions to fuel much of its growth. Increasing R&D was a must for 3D Systems if it wanted to maintain a leadership position.

2014 guidance

3D Systems Revenue of $700 million-$740 million, adjusted EPS of $0.73-$0.85, and GAAP EPS of $0.44-$0.56.
Stratasys Revenue of $750 million-$770 million, adjusted EPS of $2.25-$2.35, and GAAP EPS of $0.20 and $0.38.

Advantage: Stratasys for revenue growth; non-comparable for EPS growth.

3D Systems' guidance at the midpoint implies an adjusted earnings decrease of 4.7% on revenue growth of 40.2%, while Stratasys' guidance implies adjusted EPS growth of 25% on revenue growth of 56%. Stratasys has the obvious revenue growth advantage. It also appears to have the adjusted earnings growth advantage. However, we really can't make an apples-to-apples comparison here, as the two companies are in different positions. That's primarily because Stratasys has the Objet wrench thrown in here; the positive effect on earnings of this merger now being essentially completed are kicking in this year. In other words, Stratasys' 2013 comparison bar is lower.


Company Trailing P/E Forward P/E Five-Year PEG
3D Systems 114.3 42.6 2.8
Stratasys N/A 38.3 2.5

Source: Yahoo! Finance.

ADVANTAGE: Stratasys.

There are two main caveats here. First, both forward price-to-earnings ratios and five-year PEGs, or P/Es-to-growth, are based on analysts' estimates of future results. The 2015 projections used in the forward P/Es will likely turn out to be quite accurate, though I wouldn't put much stock in estimates five years out. In high-growth and fast-evolving technology spaces, it's impossible to know what the competitive landscape will look like in five years.

Second, these aren't the only valuation measures. Cash flow valuations are also important, with operating cash flow being a better metric than free cash flow for companies investing in growth. However, this comparison wouldn't be very telling at this point due to the negative effect of the Objet merger on Stratasys' cash flow during the trailing 12 months.

Foolish final thoughts

Stratasys is the hands-down "winner" this quarter, which marks the second quarter it has had the advantage based on the method used here. Last quarter, however, it wasn't as clear-cut. Again, investors should keep in mind the caveats previously mentioned. Namely, we only looked at some current quantitative metrics, whereas qualitative ones matter just as much. (For one example, 3D Systems has printer offerings in the fast-growing metal 3-D printing space, whereas Stratasys does not.) Additionally, for long-term investors, two quarters is still a short period.

That said, 3D Systems needs to crank up one of its metal printers, and churn out a gold-colored medal for its archrival.

If you're a believer in investing in megatrends like 3-D printing, don't miss this.

The plastic in your wallet is about to go the way of the typewriter, the VCR, and the 8-track tape player. When it does, a handful of investors could stand to get very rich. A new presentation reveals the full story on why your credit card is about to be worthless -- and highlights one little-known company sitting at the epicenter of an earth-shaking movement. Its over the last year, but it's still early in the game. Click here for full details.

Editor's note: Data in tables taken directly, or calculated, from second-quarter-earnings reports, unless otherwise noted.

The article 3D Systems vs. Stratasys Earnings: A Direct Comparison of Their Q2 Results originally appeared on

Beth McKenna has no position in any stocks mentioned. The Motley Fool recommends 3D Systems and Stratasys. The Motley Fool owns shares of 3D Systems and Stratasys. Try any of our Foolish newsletter services free for 30 days . We Fools may not all hold the same opinions, but we all believe that considering a diverse range of insights makes us better investors. The Motley Fool has a disclosure policy .

Copyright © 1995 - 2014 The Motley Fool, LLC. All rights reserved. The Motley Fool has a disclosure policy .

The views and opinions expressed herein are the views and opinions of the author and do not necessarily reflect those of Nasdaq, Inc.

The views and opinions expressed herein are the views and opinions of the author and do not necessarily reflect those of Nasdaq, Inc.

In This Story


Other Topics


Latest Markets Videos

    The Motley Fool

    Founded in 1993 in Alexandria, VA., by brothers David and Tom Gardner, The Motley Fool is a multimedia financial-services company dedicated to building the world's greatest investment community. Reaching millions of people each month through its website, books, newspaper column, radio show, television appearances, and subscription newsletter services, The Motley Fool champions shareholder values and advocates tirelessly for the individual investor. The company's name was taken from Shakespeare, whose wise fools both instructed and amused, and could speak the truth to the king -- without getting their heads lopped off.

    Learn More