Markets

3D Printing Stocks: A Deep Dive Into Arcam AB's Winning Q3 Earnings Report

AMAVF Chart

Swedish industrial metals 3D printing company Arcam AB delivered a third-quarter earnings report on Friday that delighted investors, resulting in the stock soaring 33%. The stock held on to those gains yesterday, as it closed up barely in the green. Arcam, which sells its electron beam melting, or EBM, 3D printing systems to the orthopedic implant and aerospace markets, is always the first company in the volatile 3D printing sector to report quarterly earnings.

We're going to do a deep dive into Arcam's results.

Despite its 33% jump, Arcam is still considerably off its 2014 high, due to the beating 3D printing stocks have taken this year. Data by YCharts .

Arcam's Q3 results -- Key stats:

  • Revenue jumped 125% to 90.8 million Swedish krona, or $12.6 million.
  • Organic revenue increased about 75%, with revenue from the 2014 acquisitions of metal powders manufacturer AP&C and implant contract manufacturer DiSanto Technologies accounting for the remainder of the growth, CEO Magnus Rene said on the conference call.
  • Net income catapulted to 38.2 million SEK, up from 200,000 SEK. (This includes a tax benefit of approximately 23 million SEK and nonrecurring costs associated with acquisitions of 3 million SEK.)
  • Earnings per share soared to 2.07 SEK, or $0.29, up from 0.01 SEK.
  • Nine EBM systems were delivered, versus five in the year-ago period.
  • Five orders for EBM systems were received, versus four in the year-ago period. Three additional orders were received from the end of the quarter on Sept. 30 to the date of the earnings release.
  • Backlog at the end of the quarter was 13 systems, with backlog through the date of the earnings release at 16. According to Arcam, three of the systems in the backlog at the end of the quarter will not be delivered in 2014.

(The Federal Reserve's exchange rate on Sept. 30 of 1 US dollar = 7.215 Swedish krona was used for the currency conversions.)

Performance drivers

The number of EBM systems delivered was obviously the key driver in the quarter, since the bulk of Arcam's revenue is generated from 3D printer sales. (The company just stopped providing the systems/materials revenue breakout because it doesn't believe there's a good way to break things out now due to the acquisitions.) However, that delivery number had even greater importance than usual this quarter. That's because there were delays in shipping several systems to customers last quarter. Though the reasons for the delays seemed good ones, it's now safe to say that last quarter's events were ones that are bound to occasionally occur, but not evidence of any systemic issues.

Rene stated on the conference call:

Growth [organic] in the quarter was fueled by strong systems sales; a good product mix where the average selling price was good; a good aftermarket, partly based on system deliveries, because with each delivered system we also deliver powder.

As for the product mix, the company's larger, more expensive Q20 system , launched last December, continues to sell well. The Q20 was specifically designed for series production of a wide range of aerospace components. Arcam's sales by end use continue to tilt more heavily toward aerospace, though Arcam doesn't break out the aerospace/medical implant mix.

AMAVF Cash and Equivalents (Quarterly) Chart

Data by YCharts .

Arcam's results for year-to-date 2014

While Arcam posted great quarterly results, it's critical to view the company's performance through a wider time lens than just one quarter. This is a small company that sells relatively few pricey 3D printers each quarter, so quarterly revenue results can be very "lumpy," as a shifting of just one or two systems sales from one quarter to the next can make a big difference in year-over-year comparisons.

This phenomenon was at play in the Q2-Q3 period, due to the shipment delays previously discussed.

For a better picture of how Arcam is performing, here are key stats for the nine-month period from Jan. 1 through Sept. 30:

  • Revenue rose 52% to 201.8 million SEK, or $28 million.
  • Net income increased to 42.1 million SEK, versus 7.8 million SEK in the year-ago period. (This includes a tax benefit of approximately 23 million SEK and nonrecurring costs associated with acquisitions of 9 million SEK. Excluding these effects, net income is 28.1 million SEK.)
  • Earnings per share soared to 2.29 SEK, or $0.32, up from 0.49 SEK.
  • EPS, excluding the one-time benefit and cost, were 1.53 SEK, or $0.21, versus 0.68 SEK, excluding nonrecurring costs of 3 million SEK, for the year-ago period. So, on an apples-to-apples* comparison basis, EPS rose about 125% from last year's period . ( * I'd usually use the term "non-GAAP"; however, generally accepted accounting principles don't apply to Arcam because it's not listed on a major U.S. exchange. Arcam's stock is listed on the Nasdaq OMX Stockholm, though it trades over the counter in the U.S.)
  • Twenty EBM systems were delivered, versus 15 in the year-ago period.
  • Twenty-one orders for EBM systems were received, versus 17 in the year-ago period.

With growth of 52% in revenue and 125% in EPS, Arcam's doing well on a year-to-date basis.

A 3D-printed titanium aluminide turbine blade. Source: Avio Aero.

News that bodes well for Q4 (and beyond) -- A "volume" order

Arcam expects to receive a "volume order" - which Rene defined on the call as meaning five or more systems -- before the end of the year.

A single order for more than five systems would be good news regardless of the source, given the small number of systems Arcam sells (20 so far in 2014; 25 last year). However, it will be even better news if such an order is from General Electric , given the industrial giant's appetite for 3D printers is already voracious and will further ramp up.

There are two related Arcam-GE connections that seem to fly under the radar:

  • GE already uses Arcam's EBM systems, as Avio Aero, which GE acquired in 2013, has long been an Arcam customer.

  • GE is exploring using EBM technology to 3D-print low pressure turbine blades -- or "LPT blades" -- out of titanium aluminide (TiAl) for new jet engines, such as the Leap and the GE9X. It's in the testing mode, and the initial results were positive, so a production order could be on the horizon. Granted, GE has committed to using selective laser sintering, or SLS, technology for the 3D printing of its fuel nozzles for the Leap engine, which rules Arcam out as being a supplier for that application. However, GE has more irons in the 3D-printing fire than this one.

Guidance? Arcam doesn't provide quarterly or annual revenue or earnings projections, which is not uncommon for small companies selling relatively few numbers of expensive products. This is because the previously discussed "lumpiness" factor makes it very difficult to get an accurate handle on sales projections.

More forward-looking good news -- New digs on the horizon

In response to an analyst's question about capacity constraints, Rene said during the call that Arcam plans to move into a new building in "about a year." During this exchange we learned that Arcam currently has the capacity to produce an average of approximately one 3D printer per week, and the new building should have roughly three times the capacity.

No further details were provided.

What to Watch

Arcam turned in a strong quarterly earnings report and its outlook for growth remains positive. Arcam's patented EBM technology is proprietary, so if customers want an EBM system, they have one choice as to the supplier.

On the flip side, the biggest risk factor for the company and its stock is that Arcam has all its eggs in one technology basket, as EBM is its sole tech. However, I don't think investors need to concern themselves much with this. The EBM story is looking electron-beam bright, and Arcam continues to invest in research and development.

As I've said in previous quarters, the key thing for investors to keep their eyes on is the order intake numbers -- but over a longer term than one quarter. Don't get bogged down with deliveries, as they'll eventually occur as long as orders roll in.

Potential investors need to keep in mind that 3D printing stocks are highly volatile. More specifically, Arcam's stock is extremely thinly traded, making it especially volatile and easily manipulated. Also, be aware that the stock is not as easy to follow as one listed on a major U.S. exchange.

Don't miss this $19trillion emerging industry that will dwarf 3D printing

One bleeding-edge technology is about to put the World Wide Web to bed. Experts are calling it the single largest business opportunity in the history of capitalism. One small-cap stock is sitting at the epicenter of this megatrend. It's up 60% over the last year, but it's still early in the game. Click here for the name of this stock.

The article 3D Printing Stocks: A Deep Dive Into Arcam AB's Winning Q3 Earnings Report originally appeared on Fool.com.

Beth McKenna owns shares of Arcam. The Motley Fool owns shares of General Electric Company. Try any of our Foolish newsletter services free for 30 days . We Fools may not all hold the same opinions, but we all believe that considering a diverse range of insights makes us better investors. The Motley Fool has a disclosure policy .

Copyright © 1995 - 2014 The Motley Fool, LLC. All rights reserved. The Motley Fool has a disclosure policy .

The views and opinions expressed herein are the views and opinions of the author and do not necessarily reflect those of Nasdaq, Inc.


The views and opinions expressed herein are the views and opinions of the author and do not necessarily reflect those of Nasdaq, Inc.

In This Story

GE

Other Topics

Stocks