# Using Pivot Points In FX

Trading requires reference points (support and resistance), which are used to determine when to enter the market, place stops and take profits. However, many beginning traders divert too much attention to technical indicators such as moving average convergence divergence (MACD) and relative strength index (RSI) (to name a few) and fail to identify a point that defines risk. Unknown risk can lead to margin calls, but calculated risk significantly improves the odds of success over the long haul.**Error processing SSI file**

One tool that actually provides potential support and resistance and helps minimize risk is the pivot point and its derivatives. In this article, we'll argue why a combination of pivot points and traditional technical tools is far more powerful than technical tools alone and show how this combination can be used effectively in the FX market.

**Pivot Points 101**

Originally employed by floor traders on equity and futures exchanges, pivot point have proved exceptionally useful in the FX market. In fact, the projected support and resistance generated by pivot points tends to work better in FX (especially with the most liquid pairs) because the large size of the market guards against market manipulation. In essence, the FX market adheres to technical principles such as support and resistance better than less liquid markets. (For related reading, see

*Using Pivot Points For Predictions*and

*Pivot Strategies: A Handy Tool*.)

**Calculating Pivots**

Pivot points can be calculated for any time frame. That is, the previous day's prices are used to calculate the pivot point for the current trading day.

Pivot Point for Current = High (previous) + Low (previous) + Close (previous)3 |

The pivot point can then be used to calculate estimated support and resistance for the current trading day.

Resistance 1 = (2 x Pivot Point) – Low (previous period) Support 1 = (2 x Pivot Point) – High (previous period) Resistance 2 = (Pivot Point – Support 1) + Resistance 1 Support 2 = Pivot Point – (Resistance 1 – Support 1) Resistance 3 = (Pivot Point – Support 2) + Resistance 2 Support 3 = Pivot Point – (Resistance 2 – Support 2) |

To get a full understanding of how well pivot points can work, compile statistics for the EUR/USD on how distant each high and low has been from each calculated resistance (R1, R2, R3) and support level (S1, S2, S3).

To do the calculation yourself:

- Calculate the pivot points, support levels and resistance levels for x number of days.
- Subtract the support pivot points from the actual low of the day (Low – S1, Low – S2, Low – S3).
- Subtract the resistance pivot points from the actual high of the day (High – R1, High – R2, High – R3).
- Calculate the average for each difference.

**The actual low is, on average, 1 pip below Support 1****The actual high is, on average, 1 pip below Resistance 1****The actual low is, on average, 53 pips above Support 2****The actual high is, on average, 53 pips below Resistance 2****The actual low is, on average, 158 pips above Support 3****The actual high is, on average, 159 pips below Resistance 3**

**Judging Probabilities**

The statistics indicate that the calculated pivot points of S1 and R1 are a decent gauge for the actual high and low of the trading day.

Going a step farther, we calculated the number of days that the low was lower than each S1, S2 and S3 and the number of days that the high was higher than the each R1, R2 and R3.

The result: there have been 2,026 trading days since the inception of the euro as of October 12, 2006.

**The actual low has been lower than S1 892 times, or 44% of the time****The actual high has been higher than R1 853 times, or 42% of the time****The actual low has been lower than S2 342 times, or 17% of the time****The actual high has been higher than R2 354 times, or 17% of the time****The actual low has been lower than S3 63 times, or 3% of the time****The actual high has been higher than R3 52 times, or 3% of the time**

It is important to understand, however, that theses are probabilities and

*not*certainties. On average, the high is 1 pip below R1 and exceeds R1 42% of the time. This neither means that the high will exceed R1 four days out of the next 10, nor that the high is always going to be 1 pip below R1. The power in this information lies in the fact that you can confidently gauge potential support and resistance ahead of time, have reference points to place stops and limits and, most importantly, limit risk while putting yourself in a position to profit.

**Using the Information**

The pivot point and its derivatives are potential support and resistance. The examples below show a setup using pivot point in conjunction with the popular RSI oscillator. (For more insight, see

*Momentum And The Relative Strength Index*and

*Getting To Know Oscillators - Part 2: RSI*.)

**RSI Divergence at Pivot Resistance/Support**

This is typically a high reward-to-risk trade. The risk is well-defined due to the recent high (or low for a buy).The pivot points in the above examples are calculated using weekly data. The above example shows that from August 16 to 17, R1 held as solid resistance (first circle) at 1.2854 and the RSI divergence suggested that the upside was limited. This suggests that there is an opportunity to go short on a break below R1 with a stop at the recent high and a limit at the pivot point, which is now a support:

- Sell Short at 1.2853.
- Stop at the recent high at 1.2885.
- Limit at the pivot point at 1.2784.

The next week produced nearly the exact same setup. The week began with a rally to and just above R1 at 1.2908, which was also accompanied by bearish divergence. The short signal is generated on the decline back below R1 at which point we can sell short with a stop at the recent high and a limit at the pivot point (which is now support):

- Sell short at 1.2907.
- Stop at the recent high at 1.2939.
- Limit at the pivot point at 1.2802.

The rules for the setup are simple:

For shorts:

1. Identify bearish divergence at the pivot point, either R1, R2 or R3 (most common at R1).

2. When price declines back below the reference point (it could be the pivot point, R1, R2, R3), initiate a short position with a stop at the recent swing high.

3. Place a limit (take profit) order at the next level. If you sold at R2, your first target would be R1. In this case, former resistance becomes support and vice versa.

For longs:

1. Identify bullish divergence at the pivot point, either S1, S2 or S3 (most common at S1).

2. When price rallies back above the reference point (it could be the pivot point, S1, S2, S3), initiate a long position with a stop at the recent swing low.

3. Place a limit (take profit) order at the next level (if you bought at S2, your first target would be S1 … former support becomes resistance and vice versa).

**Summary**

A day trader can use daily data to calculate the pivot points each day, a swing trader can use weekly data to calculate the pivot points for each week and a position trader can use monthly data to calculate the pivot points at the beginning of each month. Investors can even use yearly data to approximate significant levels for the coming year. The trading philosophy remains the same regardless of the time frame. That is, the calculated pivot points give the trader an idea of where support and resistance is for the coming period, but the trader - because nothing in trading is more important than preparedness - must always be prepared to act.

**by Jamie Saettele**,

**** This article and more are available at Investopedia.com - Your Source for Investing Education ****